Chandrayaan 2: Vikram hard-landed within 500 mts of landing site, says govt
The indigenously developed Chandrayaan-2 spacecraft comprising of orbiter, lander and rover was successfully launched on-board the indigenous GSLV MK III-M1 Mission on July 22. The Lander was separated, as planned, from the Orbiter on September 2...
"During the second phase of descent, the reduction in velocity was more than the designed value. Due to this deviation, the initial conditions at the start of the fine braking phase were beyond the designed parameters. As a result, Vikram hard-landed within 500 metres of the designated landing site," he said.
Singh, however, said most components of technology demonstration, including the launch, orbital critical maneuvers, lander separation, de-boost and rough braking phase were successfully accomplished.
With regards to the scientific objectives, all the eight state-of-the-art scientific instruments of the orbiter are performing according to the design and providing valuable scientific data. Due to the precise launch and orbital maneuvers, the mission life of the orbiter is increased to seven years, he said.
Data received from the orbiter is being provided continuously to the scientific community, he said, adding the same was recently reviewed in an all-India user meet organized in New Delhi.
The indigenously developed Chandrayaan-2 spacecraft comprising of orbiter, lander and rover was successfully launched on-board the indigenous GSLV MK III-M1 Mission on July 22.
After accomplishing four earth bound maneuvers and trans-lunar injection, the spacecraft was successfully inserted in the lunar orbit on August 20. A series of moon-bound maneuvers were then carried out to achieve a Lunar orbit of 119 x 127 km.
The Lander 'Vikram' was separated, as planned, from the Orbiter on September 2 2019. After two successful de-orbiting maneuvers, powered descent of the lander was initiated on September 7 to achieve soft landing on the moon surface.